Vermeer provides two new fashions to pile driver product line


With a 15 foot (4.6 m) mast that may stay absolutely assembled when transporting and aided by a 90-degree rotating platform, the design of the PD5 and PD5R might help ease the setup and teardown course of. With transportation weights of 10,380 kilos (4708.3 kg) for the PD5 and 10,330 kilos (4685.6 kg) for the PD5R, a number of models will be transported on a single trailer.

The PD5 options machine-integrated controls positioned on the aspect of the machine. The PD5R encompasses a full-function wi-fi distant management that may have interaction the hammer, precisely align the pile to finish verticality utilizing the auto plumb characteristic and place the machine. Each machines can make the most of an optionally available laser receiver or a appropriate third-party GPS system to assist enhance productiveness by higher aligning the machine to the required pile set up location.

“The photo voltaic business has skilled great development in the previous few years, and the Vermeer PD10 and PD10R pile drivers have been among the many most widespread machines used for putting in floor mount photo voltaic piles,” explains Ed Savage, product supervisor at Vermeer. “In fact, not each jobsite is similar, so we created the brand new PD5R and PD5 pile drivers to provide contractors smaller and extra light-weight choices. These models embody most of the similar options because the PD10 and have comparable productiveness in a wide range of soil circumstances.”

Each pile drivers are powered by a Cat 49 horsepower (36.5 kW) Tier 4 Ultimate diesel engine, have a ahead journey velocity of two.4 mph (3.9 km/h) and each characteristic a mast pull-down that’s rigidly connected to the mast chain to ship highly effective power. Each machines will likely be out there late 2020.



Source link